36 mm straight bolt for narrow-stile commercial doors

The Lenlok C-702 long throw mortice lock is a narrow-stile lock for suitable aluminium doors, commonly used on shopfront and commercial entries. It is available as a body only or with double-cylinder, internal-turn or escape-lever configurations.

Ask About This Lock Call Abetta

36 mm
Straight bolt

181 mm
Lock-body length

50.8 mm
Cylinder-centre reference

4 options
Body and cylinder sets

Where this model is used

The long-throw version is intended for suitable hinged aluminium-stile doors where the frame preparation can accept a 36 mm straight-bolt projection.

Non-lever configurations are designed to retrofit other brands of narrow-stile mortice locks, but a nominal match is not enough on its own. Abetta checks the existing cut-out, faceplate, cylinder position, door thickness, strike and frame clearances before confirming compatibility.

Key features

36 mm straight bolt.
Narrow-style mortice body for suitable aluminium-stile doors.
Available as body only, double cylinder, cylinder with internal turn, or cylinder with internal escape lever.
Compatible with oval-cylinder configurations shown by the manufacturer.
Satin chrome finish across the current product codes listed below.
Lenlok states that all required lock-set parts are included in the box for this model; the final cylinder/turn/lever content depends on the selected product code.

Models and configurations

Product code	Configuration
C-702BLT	Body only; boxed single; satin chrome
C-702DCLT	Double cylinder; boxed single; satin chrome
C-702CTLT	Cylinder and internal turn; boxed single; satin chrome
C-702CLLT	Cylinder and escape lever; boxed single; satin chrome

These are the model descriptions published in Lenlok’s current technical library. Availability should be confirmed when quoting.

Dimensions from Lenlok technical data

Lock-body length	181 mm
Overall body height	36 mm
Nominal case thickness	15.6 mm
Maximum overall thickness shown	20.6 mm
Faceplate width shown	11 mm
Cylinder-centre reference	50.8 mm from the leading reference in the manufacturer drawing
Bolt-centre reference	26 mm

Lenlok C-702 flip bolt mortice lock dimensional drawing for short, long and hook throw models — Lenlok C-702 family dimensions. All dimensions are in millimetres; confirm the opening before ordering.

Accessories and finishing options

Lenlok oval cylinder escutcheons in polished brass and satin chrome — Oval-cylinder escutcheons are available separately in polished brass or satin chrome.

Lenlok oval cylinder turn snibs in satin chrome, polished brass and chrome plate — Oval-cylinder turn snibs with R cam are available separately in satin chrome, polished brass and chrome plate.

Replacement and installation checks

For an initial match, send clear photographs of the door edge, the lock faceplate, both faces of the door, the strike and any markings on the old lock. Include the extended-bolt measurement and the cylinder-centre measurement if possible. A worn lock may also be affected by door alignment, frame movement or a damaged strike, so the complete opening should be assessed.

Important for exit, fire and accessibility-sensitive doors: suitability depends on the complete door assembly, selected cylinder or escape hardware and applicable requirements. The final configuration should be assessed for the specific opening.

Lenlok productsBrowse the Lenlok range available through Abetta.Mortice locksCompare other mortice-lock options and replacement advice.Commercial door hardwareAssessment, supply, installation and maintenance for complete door systems.

Manufacturer reference: Lenlok C-702 flip bolt mortice lock range.

Need the right C-702 configuration?

Send Abetta your door photos, measurements, required internal operation and Sunshine Coast suburb. We can identify the likely model and quote supply or installation.

Call Abetta Request Pricing